Eazi-Grip EVO KTM 890 Adventure Clear Tank Grips
Buy now, pay later
Manufactured in the UK from high-quality polyurethane, these traction pads are designed to be applied to the fuel tank recesses next to the rider's knees and come pre-cut to size.
Not all tank grips are the same, and choice is usually down to rider preference. Eazi-Grip EVO tank grips have a soft but durable domed surface that is very easy to grip, giving the rider increased control with minimal effort, thereby reducing fatigue and reducing wear to the rider's leathers or clothing. Eazi-Grip EVO Tank Grips tend to suit the less aggressive rider (primarily road and occasional track use) and are a great alternative to more abrasive, higher-priced tank grips available on the market.
- High-quality polyurethane with soft but durable domed surface
- Improves rider control in corners and under braking with minimal effort
- Non-abrasive - kind to riders leathers
- Cut to size - quick and easy to apply - instructions and IPA surface cleaner provided
- Road and track use only - not suitable for off-road use
Hint: Black grips look better than clear on a black tank, where clear grips can appear a little blue. Black grips can also look better than clear on a pure white tank, where clear grips can appear a little yellow. Clear grips are optimised for colours other than black and pure white.
Peel back part of the release liner then press the tank grip firmly onto the tank and slowly peel back the liner whilst applying the grip. Push down the surface and take care not to trap air bubbles as you go. Allow 48 hours for the adhesive to fully bond before using the grips. Use an IPA cleaner to prepare surface area NO methylated spirits/petrol/lighter fluid etc. as these leave behind a thin, greasy residue. For best results ensure prepared surface is above 10 degrees C.